WARNINGS, DEFINITIONS, AND CAUTIONS

Working Load Limit:

The Working Load Limit or Safe Working Load is the maximum load which should ever be applied to the product under any condition. The Working Load Limit is based on a load being uniformly applied in a straight line pull.

Breaking Strength:

Do NOT use Breaking Strength for design or rating purposes. Use the Working Load Limit instead. Breaking Strength is an average figure at which samples have been found to break under laboratory conditions in straight line pulls with constantly increasing loads. These conditions are rarely duplicated in actual use. The Breaking Strength applies to new and unused wire rod for Wire Rope, Aircraft Cable, and Chain.

Proof Load:

The load a product can withstand during quality control test for the purpose of detecting defects and deformation in the material, usually twice the Working Load Limit.

Matching Components:

All attachments used with chain and wire rope must be of suitable material, type and strength to provide adequate safety protection. Attachments should have Working Load Limits at least equal to the other components with which they are used.

Inspection Warning:

No product can operate indefinitely at its rated capacity. Cable, wire rope, chain, and their attachments must be inspected regularly by a trained or qualified individual for visible damage, distortion, elongation, corrosion, cracks, nicks, or abrasion, which may cause failure or reduce the strength or ability of the product to perform safely.

Shock Loads:

Loads which exceed the static shock caused by a rapid change of movement, such as jerking, impacting, or swinging of load. Working Load Limits will not apply.

Marking Requirements:

The US Customs law requires that the end user of imported products be informed of the country of origin. All imported products sold by Advantage Sales & Supply are marked accordingly. Re-sellers are responsible to relay this country of origin information to the end user.

Warnings:

  • No product can operate indefinitely at its rated capacity.
  • Avoid shock loads and side loads.
  • Keep out from under a raised load.
  • Never exceed the Working Load Limit.
  • Inspect your rigging and cargo control products regularly.

RATCHET LOAD BINDERS

TWO PIECE HANDLE

PREMIUM RATCHET LOAD BINDERS

LOK-DOWN™ Series Ratchet Load Binders

Hook Hook

hookhook

  • All load bearing fittings are forged
  • Quenched and tempered
  • Grab hooks, links and eye bolts are yellow zinc plated
  • Handle and barrel are powder coated
  • Heavy duty swaged tube body
  • Two piece handle
  • Ultimate load is 3 times the working load limit
  • Switch is operated by heavy duty spring
  • Load binders are DOT approved
STOCK NUMBER CHAIN SIZE TAKE-UP BARREL LENGTH HANDLE LENGTH SCREW DIAMETER WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
LKD8800 5/16”-3/8” 8” 10” 15.5 1” 8,800 17,600 12.25
LKD12000 3/8”-1/2” 8” 10” 15.5 1” 12,000 24,000 14.2
LKD18100 1/2”-5/8” 8” 10” 15.5 1” 18,100 36,200 16

JAW-JAW

jawjaw

  • All load bearing fittings are forged
  • Quenched and tempered
  • Jaw end fittings are yellow zinc plated
  • Handle and barrel are powder coated
  • Heavy duty swaged tube body
  • Two piece handle
  • Pin comes complete with nut and lock-washer
  • Ultimate load is 3 times the working load limit
  • Switch is operated by heavy duty spring
  • Load binders are DOT approved
STOCK NUMBER CHAIN SIZE TAKE-UP BARREL LENGTH HANDLE LENGTH SCREW DIAMETER WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
LKD16000JJ 1/2”-5/8” 8” 10” 15.5 1” 16,000 32,000 14

ONE PIECE HANDLE

PREMIUM RATCHET LOAD BINDERS

GOLD-TIP™ Series Ratchet Load Binders

Hook Hook

gtHookHook

  • All load bearing fittings are forged
  • Quenched and tempered
  • Grab hooks, links and eye bolts are yellow zinc plated
  • Handle and barrel are powder coated
  • Heavy duty swaged & tapered tube body
  • One piece handle
  • Ultimate load is 3 times the working load limit
  • Load binders are DOT approved
STOCK NUMBER CHAIN SIZE TAKE-UP BARREL LENGTH HANDLE LENGTH SCREW DIAMETER WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
GT7100 5/16”-3/8” 8” 10” 15.5 7/8” 7,100 14,200 9
GT12000 3/8”-1/2” 8” 10” 15.5 1” 12,000 24,000 14
GT13000 1/2”-5/8” 8” 10” 15.5 1” 13,000 26,000 16

EYE-EYE

gteyeeye

  • All load bearing fittings are forged
  • Quenched and tempered
  • Eye bolts are yellow zinc plated
  • Handle and barrel are powder coated
  • Heavy duty swaged & tapered tube body
  • One piece handle
  • Ultimate load is 3 times the working load limit
  • Load binders are DOT approved
STOCK NUMBER TAKE-UP BARREL LENGTH HANDLE LENGTH SCREW DIAMETER WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
GT13000EE 8” 10” 15.5 1” 13,000 26,000 10

ONE PIECE HANDLE

PREMIUM RATCHET LOAD BINDERS WITH SLIP HOOKS

GOLD-TIP™ Series Ratchet Load Binders

GRAB-SLIP

GThookhook2

  • All load bearing fittings are forged
  • Quenched and tempered
  • Grab Hooks, links and slip hooks and eye bolts are yellow zinc plated
  • Handle and barrel are powder coated
  • Heavy duty swaged & tapered tube body
  • One piece handle
  • Ultimate load is 3 times the working load limit
  • Load binders are DOT approved
STOCK NUMBER CHAIN SIZE TAKE-UP BARREL LENGTH HANDLE LENGTH SCREW DIAMETER WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
GT12000GS 3/8”-1/2” 8” 10” 15.5 1” 12,000 24,000 17

GRAB-GRAB-SLIP

GGShookhook2

  • All load bearing fittings are forged
  • Quenched and tempered
  • Grab Hooks, links and slip hooks and eye bolts are yellow zinc plated
  • Handle and barrel are powder coated
  • Heavy duty swaged & tapered tube body
  • One piece handle
  • Ultimate load is 3 times the working load limit
  • Load binders are DOT approved
STOCK NUMBER CHAIN SIZE TAKE-UP BARREL LENGTH HANDLE LENGTH SCREW DIAMETER WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
GT15000GGS  1/2”-5/8” 8” 10” 15.5” 1” 15,000 30,000 17.5

ONE PIECE HANDLE

PREMIUM HIGH CAPACITY RATCHET LOAD BINDERS

BIG-FOOT™ Series Ratchet Load Binders – Designed for EXTREME loads

Hook Hook

hookhook

  • All load bearing fittings are forged
  • Quenched and tempered
  • Grab Hooks, links and eye bolts are yellow zinc plated
  • Handle and barrel are powder coated
  • Heavy duty swaged & tapered tube body
  • One piece handle
  • Ultimate load is 3 times the working load limit
  • Load binders are DOT approved
STOCK NUMBER CHAIN SIZE TAKE-UP BARREL LENGTH HANDLE LENGTH SCREW DIAMETER WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
BFT15000  3/8”-1/2” 8” 10” 15.5” 1” 15,000 30,000 15
BFT16000 1/2”-5/8” 8” 10” 15.5” 1” 16,000 32,000 16

ECONOMY

RATCHET LOAD BINDERS

economy

  • All load bearing fittings are forged
  • Quenched and tempered
  • Entire assembly is powder coated
  • Heavy duty swaged tube body
  • One piece handle
  • Ultimate load is 3 times the working load limit
  • Load binders are DOT approved
SIZE STOCK NUMBER WORKING LOAD LIMIT (LBS.) WORKING LOAD LIMIT (LBS.)
1/4” Grade 30, 1/4” Grade 43 RBNDR250 2,600 15
5/16” Grade 70, 3/8” Grade 70 RBNDR375 6,600 11
3/8” Grade 70, 1/2” Grade 43 RBNDR500 9,200 13
1/2” Grade 70, 5/8” Grade 43 RBNDR625 11,300 16

The most reliable economy load binder in the trucking industry!

“T” HANDLE

RATCHET LOAD BINDERS

“T” HANDLE Ratchet Load Binders

Hook Hook

thandle

  • All load bearing fittings are forged
  • Quenched and tempered
  • Heavy duty swaged tube body
  • Handle and barrel are powder coated
  • Hooks have 360˚ rotation
  • Grab hook, links and eye bolts are yellow zinc plated
  • One piece “T” handle for easy grip
  • Great for the towing industry
  • Load binders are DOT approved
STOCK NUMBER CHAIN SIZE TAKE-UP BARREL LENGTH HANDLE LENGTH SCREW DIAMETER WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
RBNDR7100T 5/16”-3/8” 6” 8” 9” 7/8” 7,100 14,200 10

PREMIUM LEVER LOAD BINDERS

LEVER TYPE Binder

economylever

  • All load bearing fittings are forged
  • Quenched and tempered
  • Entire assembly is powder coated
  • Hooks have 360˚ rotation
  • Load binders are DOT approved
SIZE STOCK NUMBER WORKING LOAD LIMIT (LBS.) WORKING LOAD LIMIT (LBS.)
1/4” Grade 30, 1/4” Grade 43 LBNDR250 2,600 4
5/16” Grade 70, 3/8” Grade 43 LBNDR375 5,400 7
3/8” Grade 70, 1/2” Grade 43 LBNDR500 9,200 13

COMPRESSION SPRING Lever Load Binder

coil

  • All load bearing fittings are forged
  • Quenched and tempered
  • Entire assembly is powder coated
  • Hooks have 360˚ rotation
  • Steel Coil Spring acts as a shock-absorber
  • Great for rubber tired vehicle carriers
  • Load binders are DOT approved
STOCK NUMBER CHAIN SIZE TAKE-UP HANDLE LENGTH WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
LBNDR6600SPRING 5/16”-3/8” 4.5” 16” 6,600 13,200 15
LBNDR9200SPRING 3/8”-1/2” 4.5” 18” 9,200 18,400 19

RECOIL-LESS Lever Load Binder

recoilless

    • All load bearing fittings are forged
    • Quenched and tempered
    • Entire assembly is powder coated
    • Hooks have 360˚ rotation
    • Kickback on handle is reduced by two-stage design
    • Kickback on handle is reduced by two-stage design
    • Load binders are DOT approved
STOCK NUMBER CHAIN SIZE TAKE-UP HANDLE LENGTH WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
LBNDR5400RECOIL 5/16”-3/8” 4.5” 16” 5,400 10,800 10

CLAW-CLAW Lever Load Binder

clawtype

    • Quenched and tempered
    • Entire assembly is powder coated
    • Hooks have 360˚ rotation
    • All load bearing fittings are forged
    • Commonly used in Automotive Frame Straightening operations
    • Claw hook is designed to cradle the entire link
    • Load binders are DOT approved
STOCK NUMBER CHAIN SIZE TAKE-UP HANDLE LENGTH WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
LBNDR6600CC 5/16”-3/8” 4.5” 16” 6,600 13,200 11

LIGHT DUTY Lever Load Binder

lightduty

  • Steel formed wire “J” Hooks
  • Forged handle
  • Quenched and tempered
  • Entire assembly is powder coated
  • One hook rotates 360˚
  • Load binders are DOT approved
STOCK NUMBER TAKE-UP HANDLE LENGTH WORKING LOAD LIMIT (LBS.) PROOF LOAD LIMIT (LBS.) WEIGHT/PER PIECE (LBS.)
LBNDRLIGHTDUTY 3” 9.5” 375 750 2

SAFETY RATCHET STRAPS

1x15BLK

1x15YLW

bluestrap

1” POLYESTER RATCHET TIE-DOWNS WITH S- AND J- HOOKS

SIZE STOCK NUMBER COLOR END FITTING CAPACITY (LBS.)
1″ x 8′ STRAP1X8 Yellow Black Vinyl S-Hook 3,000
1″ x 8′ STRAP1X8B Black Black Vinyl S-Hook 3,000
1″ x 12′ STRAP1X12 Yellow Black Vinyl S-Hook 3,000
1″ x 15′ STRAP1X15 Yellow Black Vinyl S-Hook 3,000
1″ x 15′ STRAP1X15B Black Black Vinyl S-Hook 3,000
1″ x 15′ STRAP1X15BLU Blue Black Vinyl S-Hook 3,000
1″ x 15′ STRAP1X15J Yellow Yellow Zinc Wire J-Hook 3,000

Custom sizes available from our in-house sew shop.

2x27withchaintail

2x27Flathook

2x27Jhook

2” YELLOW POLYESTER RATCHET TIE-DOWNS WITH FLAT, CHAIN GRAB, AND J- HOOKS

SIZE STOCK NUMBER END FITTINGS RATCHET BREAKING STRENGTH (LBS.) WEIGHT (LBS.)
2” x 8’ STRAP2X8J J-Jooks Long/Wide Handle 10,000 4
2” x 15’ STRAP2x15 Flat Hooks Long/Wide Handle 10,000 4.5
2” x 15’ STRAP2X15J J-Jooks Long/Wide Handle 10,000 4.5
2” x 27’ STRAP2X27 Flat Hooks Long/Wide Handle 10,000 6
2” x 27’ STRAP2X27J J-Jooks Long/Wide Handle 10,000 6
2” x 27’ STRAP2x27CG Chain Grab Hooks Long/Wide Handle 10,000 11

Custom sizes available from our in-house sew shop.

2x27Jhook

2x27Flathook

2x27withchaintail

3” YELLOW POLYESTER RATCHET TIE-DOWNS WITH FLAT & J-HOOKS

SIZE STOCK NUMBER HOOKS RATCHET BREAKING STRENGTH (LBS.) WEIGHT (LBS.)
3” x 30’ STRAP3X30RFH Flat Hooks Long Handle 15,000 15
3” x 30’ STRAP3X30RJH J-Hooks Long Handle 15,000 15

Custom sizes available from our in-house sew shop.

4” YELLOW POLYESTER RATCHET TIE-DOWNS WITH FLAT & CHAIN GRAB HOOKS

SIZE STOCK NUMBER HOOKS RATCHET BREAKING STRENGTH (LBS.) WEIGHT (LBS.)
4” x 30’ STRAP4X30F Flat Hooks Long Handle 15,000 19
4” x 30’ STRAP4X30CG Chain Grab Hooks Long Handle 15,000 21.3

Custom sizes available from our in-house sew shop.

replacementstrapJhook

replacementstrapFlathook

2” & 4” YELLOW POLYESTER REPLACEMENT STRAPS WITH FLAT & J-HOOKS

SIZE STOCK NUMBER HOOKS BREAKING STRENGTH (LBS.) WITH FLAT & J-HOOKS WEIGHT (LBS.)
2” x 26” STRAP2x26R Flat Hook 10,000 2.6
2” x 26” STRAP2x26JR J Hook 10,000 2.6
4” x 30’ STRAP4X30 Flat Hook 15,000 5.5

 

18inchchainanchorwithpearlink

18” CHAIN ANCHOR WITH PEAR LINK FOR 2” WEBBING

STOCK NUMBER CHAIN HOOK WORKING LOAD LIMIT (LBS.) BREAKING STRENGTH (LBS.) FOR 2” WEBBING WEIGHT (LBS.)
Y3816 5/16” G70 5/16” G70 3,335 10,000 3.75

 

18inchchaintaildelta

STOCK NUMBER CHAIN HOOK WORKING LOAD LIMIT (LBS.) BREAKING STRENGTH (LBS.) FOR 3” & 4” WEBBING WEIGHT (LBS.)
Y3816A 3/8” G70 3/8” G70 5,000 15,000 3.86

TWBOSTD

TWWOSTD

TWBOLP

TWSLDSTD

TWWODEEP

STOCK NUMBER DESCRIPTION SIZE LENGTH WIDTH HEIGHT TRAILER MOUNT POSITION WEIGHT EACH (LBS.)
TWBOSTD 4” Bolt-On Standard 4 7/8” 5 5/16” 3 9/16” Bottom 10
TWBOLP 4” Bolt-On Low Profile 4 7/8” 5 5/16” 4” Side 9
TWSLDSTD 4” Sliding Standard 5” 5 1/2” 4” Bottom 11
TWWOSTD 4” Weld-On Standard 4 7/8” 5 5/16” 3 9/16” Bottom 8
TWWODEEP 4” Weld-On Deep Pocket 5” 7” 4” Bottom 11

WINCH BARS

 

standardwinchbar

STANDARD

 

combinationwinchbar

COMBINATION

 

STANDARD WINCH BAR

STOCK NUMBER FINISH LENGTH WEIGHT (LBS.)
Y709 Painted Black 32.5” 5.1

 

COMBINATION WINCH BAR

STOCK NUMBER FINISH LENGTH WEIGHT (LBS.)
Y709A Painted Black 37” 6

WELD-ON PARTS

WELD-ON D-RING

weldondring copy copy

  • The rings come with weld-on mounting brackets
  • Self colored
  • Not for overhead lifting
STOCK NUMBER WORKING LOAD LIMIT (LBS.) BREAKING STRENGTH (LBS.) MATERIAL WEIGHT (LBS.) DESCRIPTION
J-704 3,000 12,000 C-1045 0.45 1/2” forged D-ring w/ weld-on or bolt-on mounting bracket
J-705 4,500 18,000 C-1045 0.7 5/8” forged D-ring w/ weld-on mounting bracket
J-706 6,625 26,500 C-1045 0.95 3/4” forged D-ring w/ weld-on mounting bracket
J-707 11,685 46,750 C-1045 1.3 1” forged D-ring w/ weld-on mounting bracket

Welding is to be performed by a qualified welder using a qualified procedure in accordance with American Welding Society.

WELD-ON CHAIN RETAINER

reatiner

  • Not for overhead lifting
  • Self colored
  • Weld on design for easy chain attachment
STOCK NUMBER WORKING LOAD LIMIT (LBS.) BREAKING STRENGTH (LBS.) WEIGHT (LBS.) DESCRIPTION
CR10000 2,500 10,000 0.45 Fits 1/4”-5/16” chain
CR20000 5,000 20,000 1.3 Fits 5/16”-3/8” chain

Welding is to be performed by a qualified welder using a qualified procedure in accordance with American Welding Society.

BINDER, TOWING, & LIFTING CHAIN

CARGO CONTROL CHAIN

BINDER CHAINS

11-516G7-LENGTH

  • Every link has been proof tested to 2 times the working load
  • Grade 70 transport chain is used when higher work loads or DO regulations require stronger chain
  • Custom lengths and hooks available upon request
  • DOT approved

GRADE 70 TRANSPORT BINDER CHAIN WITH GRAB HOOK EACH END

SIZE STOCK NUMBER GRADE/FINISH WORKING LOAD LIMIT (LBS.) WEIGHT/PIECE (LBS.) PIECES/DRUM
5/16” X 16’ G70BC312X16 Gr 70/Yellow Chr 4,700 16 25
5/16” X 20’ G70BC312X20 Gr 70/Yellow Chr 4,700 23 25
5/16” X 25’ G70BC312X25 Gr 70/Yellow Chr 4,700 26 20
3/8” X 16’ G70BC375X16 Gr 70/Yellow Chr 6,600 26 25
3/8” X 20’ G70BC375X20 Gr 70/Yellow Chr 6,600 32 20
3/8” X 25’ G70BC375X25 Gr 70/Yellow Chr 6,600 37 15
1/2” X 10’ G70BC500X10 Gr 70/Yellow Chr 11,300 45.5 10
1/2” X 20’ G70BC500X20 Gr 70/Yellow Chr 11,300 52 10
1/2” X 25’ G70BC500X25 Gr 70/Yellow Chr 11,300 65 10

Grade 70 Transport Chain is used when higher work loads or DOT regulations require stronger chain. Custom lengths and hooks available upon request. DOT approved. NOT suitable for overhead lifting.

SGG

  • Every link has been proof tested to 2 times the working load
  • Grade 8 alloy Chain is used when higher work loads or DOT regulations require stronger chain
  • Custom lengths and hooks available upon request
  • DOT approved
  • Approved by OSHA fro overhead lifting with proper hooks

GRADE 80 BINDER CHAINS WITH GRAB HOOKS

SIZE STOCK NUMBER GRADE/FINISH WORKING LOAD LIMIT (LBS.) WEIGHT/PIECE (LBS.) PIECES/DRUM
5/16” X 16’ G80BC312X16 Gr 80/Black Lacquer 4,500 16 25
5/16” X 20’ G80BC312X20 Gr 80/Black Lacquer 4,500 23 25
5/16” X 25’ G80BC312X25 Gr 80/Black Lacquer 4,500 26 20
3/8” X 16’ G80BC375X16 Gr 80/Black Lacquer 7,100 26 25
3/8” X 20’ G80BC375X20 Gr 80/Black Lacquer 7,100 32 20
3/8” X 25’ G80BC375X25 Gr 80/Black Lacquer 7,100 37 15
1/2” X 10’ G80BC500X10 Gr 80/Black Lacquer 12,000 45.5 10
1/2” X 20’ G80BC500X20 Gr 80/Black Lacquer 12,000 52 10
1/2” X 25’ G80BC500X25 Gr 80/Black Lacquer 12,000 65 10

Grade 80 Lifting Chain is used when higher work loads or DOT regulations require stronger chain. Custom lengths and hooks available upon request. DOT approved. Suitable for overhead lifting with proper hooks. Larger sizes available upon request.

CARGO CONTROL CHAIN

TOWING & TIE-DOWN CHAINS

g70chain2

  • Every link has been proof tested to 2 times the working load
  • Grade 70 Transport Chain is used when higher work loads or DOT regulations require stronger chain
  • Custom lengths and hooks available upon request
  • DOT approved

GRADE 70 CARGO CONTROL CHAIN

SIZE STOCK NUMBER FEET/DRUM WORKING LOAD LIMIT (LBS.) WEIGHT/FOOT (LBS.)
1/4” G70250 400’,  800’ drum 0.63 3,150
5/16” G70312 275’,  550’ drum 0.93 4,700
3/8” G70375 200’,  400’ drum 1.41 6,600
1/2” G70500 100’,  200’ drum 2.4 11,300
5/8” G70625 75’, 150’ drum 3.53 15,800
1/4” G70250X133 133’ pail 0.63 3,150
5/16” G70312X92 92’ pail 0.93 4,700
3/8” G70375X66 66’ pail 1.41 6,600
1/2” G70500X33 33’ pail 2.4 11,300

Grade 70 Transport Chain is used when higher work loads or DOT regulations require stronger chain. Custom lengths and hooks available upon request. DOT approved. NOT suitable for overhead lifting.

g80soft

  • Every link has been proof tested to 2 times the working load
  • Grade 80 alloy chain is approved by OSHA for overhead lifting
  • Black lacquer finish
  • DOT approved

GRADE 80 ALLOY CHAIN

SIZE STOCK NUMBER FEET/DRUM WORKING LOAD LIMIT (LBS.) WEIGHT/FOOT (LBS.)
9/32” G80281 400’, 800’ 3,500 0.72
5/16” G80312 275’, 550’ 4,500 1.06
3/8” G80375 200’, 400’ 7,100 1.5
1/2” G80500 100’, 200’ 12,000 2.61
5/8” G80625 75’, 150’ 18,100 3.61

Grade 80 Lifting Chain is used when higher work loads or DOT regulations require stronger chain. Custom lengths and hooks available upon request. DOT approved. Suitable for overhead lifting.

GRADE 100 CHAIN & CHAIN SLINGS

OVERHEAD LIFTING CHAINS

GRADE 100 CHAIN

g100chain

  • Every link has been proof tested to 2 times the working load
  • All grade 100 chain is made from 8620 alloy
  • Shot blast finish
  • 100 Chain is approved by OSHA for cargo control and overhead lifting
STOCK NUMBER SIZE MATERIAL DIAMETER INSIDE WIDTH INSIDE LENGTH WORKING LOAD LIMIT (LBS.) FEET/DRUM WEIGHT/FT
X100 281 9/32″ 0.283” .420” 0.85” 4,300 800’ 0.74
X100 312 5/16” 0.315” .500” 1.04” 5,700 550’ 0.94
X100 375 3/8” 0.394” .575” 1.26” 8,800 400’ 1.48
X100 500 1/2” 0.512” .768” 1.64” 15,000 200’ 2.55
X100 625 5/8” 0.630” .930” 2.00” 22,600 150’ 3.83

GRADE 100 Chain Assemblies

chain-types

 

CHAIN SIZE SINGLE SLING AT 90° ANGLE DOUBLE SLING AT 60° ANGLE DOUBLE SLING AT 45° ANGLE DOUBLE SLING AT 30° ANGLE TRIPLE/QUADRUPLE  60° ANGLE TRIPLE/QUADRUPLE  45° ANGLE TRIPLE/QUADRUPLE  30° ANGLE CHAIN SIZE
9/32” 4,300 7,400 6,100 4,300 11,200 9,100 6,400 9/32”
5/16” 5,700 9,900 8,100 5,700 14,800 12,100 8,500 5/16”
3/8″ 8,800 15,200 12,400 8,800 22,900 18,700 13,200 3/8″
1/2” 15,000 26,000 21,200 15,000 39,000 31,800 22,500 1/2”
5/8” 22,600 39,100 32,000 22,600 58,700 47,900 33,900 5/8”
3/4” 35,300 61,100 49,900 35,300 91,700 74,900 53,000 3/4”

CORNER PROTECTORS, TARP STRAPS, CARGO BARS & HOLDERS

cornerprotector

rubbercornerprotector1

rubbercornerprotector2

CORNER PROTECTORS

STOCK NUMBER DESCRIPTION WEIGHT EACH (LBS.)
4CP Plastic Corner Protector for 2”, 3”, and 4” webbing 0.4
2RP Rubber Corner Protector for 2” webbing 0.5
4RP Rubber Corner Protector for 3” and 4” webbing 1.2

rubberstrap

RUBBER TARP STRAPS

STOCK NUMBER OVERALL LENGTH STRAP LENGTH S-HOOK DIAMETER END FITTINGS
TARPSTRAP9 13” 9” 3/16” S-HOOK
TARPSTRAP15 19” 15” 3/16” S-HOOK
TARPSTRAP21 25” 21” 3/16” S-HOOK
TARPSTRAP31 35” 31” 3/16” S-HOOK
TARPSTRAP41 45” 41” 3/16” S-HOOK

Made with EPDM Synthetic Rubber. S-Hooks are Electro-Galvanized.

cargobar

CARGO BAR

STOCK NUMBER DESCRIPTION REACH INCHES MIN/MAX TUBE DIAMETER END FITTINGS
CBAR Steel Cargo Bar 89”-104” 1.5 2” x 4” Rubber

CARGOHOLDER

CARGO BAR HOLDER ELECTRO-GALVANIZED

STOCK NUMBER DESCRIPTION
CBARHOLDER Two Piece Steel Cargo Bar Holder